4
/
14
4
Back tacking
The back tacking key is selected for each short press, the cyclical
selection is between the front tacking, the front double tacking and
the closing, and the corresponding LCD screen is lit. Select the
corresponding key to set the number of needles of C and D.
5
Thread clamp/
Auto trigger key
Press this key for short time,ico become lit, so thread clamp is
working now, press again, the turn this function
Long press this key in multi-segment sewing mode to turn on and
off the automatic trigger function
6
Press foot lift key
Press this key for short time, choose or cancel this function. If
choose this function, then will show press foot lift after trimmer
Press this key for long time, choose or cancel this function, if
choose, will show press foot lift on halfway
7
Free
sewing/trimmer
Press for short time, icon become lit, choose free sewing function.
Press for long time, icon become lit, trimmer function turn on, press
again, trimmer function turn off.
8
W sewing/
Multi-segment
Tacking
1
、
Press this key for short time, icon is lit, so now is W sewing
mode, choose the corresponding key to set A,B,C,D
2
、
Press the key for long time, icon is lit, means now is Several
Segment Tacking mode, choose corresponding key to set all steps,
and all stitches of each step.
9
Lock stitch
key/Needle
position
section key
Press short time to this key, the lock stitch function will switch to
front lock, rear lock, front and back lock, close; Press long time to
enter needle position function
10
Pattern sewing
key/Presser foot
lifting key
Short press this key to enter the pattern sewing mode, short press
this key in this mode to switch between the pattern sewing interface
and the pattern sewing setting interface
Long press this button to switch the presser foot lifting function
switch, the corresponding icon is on and off, and the icon is on to
indicate that the presser foot lifting function is on
11
Power-on voice
message and
voice on/off key
Without error warning:
1. Short press this key: The power-on voice is disabled. Short press
again to enable the power-on voice.
2. Long press this key: The voice function is disabled. Then, long
press again to enable the voice function.
With error warning: Short press this key to broadcast the error
code solution directly.
12
P
arameter mode
Enter the parameter function
13
Up key(speed up) Enter this mode, adjust this key, increase speed
