Jack JK-K4-UT, Manual Book & Parts Book

Page: 65 / 132

6/8
time)
P 7 6 1~500 60
Trimming electromagnet full output time ms
P 9 8 0~4 4
Mention voice volume (0 to 4) 4 for maximum volume changes (factory default)
P 9 9 0~2 1
language selection 0: off, 1: Chinese, 2:English, default language 1 Chinese
P A 0 1
̚
9999 0
The lift foot release down Delay time after remove cloth when sensing turn on.
P A 1 0~600 50
The lift foot release down Delay time with cloth when sensing turn on.
P A 5 0~3 0
0: Switch on the voice,Buttons voice,Parameters voice,Error voive;1: Switch on the
voice;2: Buttons voice, Error voive;3: Switch on the voice,Buttons voice,Error voice
P A 6 1~100 1
Stitch counter mode setting ratio
P A 7 1~9999 1
Stitch counter mode total stitches setting
P A 8 0~6 0
Stitch counter mode setting
P A 9 1~100 1
Pieces counter mode setting ratio
P A A 1~9999 1
Pieces counter mode total stitches setting
P A B 0~4 0
Pieces counter mode setting
3.2 Monitor mode
No. Description No. Description
0 1 0
stitch counter
0 2 5
The sampling voltage of pedal
0 1 1
Counter for sewing pieces
0 2 6
The ratio between motor and machine
0 1 2
The head of real speed
0 2 7
The total used time(hours) of motor
0 1 3
State of encoder
0 2 8
The sampling voltage of interaction
0 2 0
DC voltage
0 2 9
Software version
0 2 1
Machine speed 0 2 A Analog input 1
0 2 2
The phase current 0 2 B Analog input 2
0 2 3
Initial electrical angle 0 2 C Error counter
0 2 4
Machine angle
0 3 0 - 0 3 7
The history record of error codes
3.3 The warning message
Alarm code
Description Corrective
㻌
Stitch counter alarm
The stitch counter reaches the limit. Press key to cancel the alarm and
reset the counter.
㻌 Trimming counter alarm
The trimming counter reaches the limit. Press key to cancel the alarm and
reset the counter.