Jack JK-K4-UT, Manual Book & Parts Book

Page: 62 / 132

3/8
Index mark Description Index Icon Description
Index
Icon Description Index Icon Description
ķ
Down needle Position Ȕ
11
W bar tacking sewing(No functtion)
ĸ
Up needle Position Ȕ
12
Multi-section constant-stitch sewing(No
functtion)
Ĺ
Automatic trimming
Ȕ
13
The bottom line counter
ĺ
Foot lifting at seam End Ȕ
14
One-Shot-Sewing in constant-stitch
Ļ
Foot lifting after trimming
Ȕ
15
Voice reminder
ļ
Presser foot lifting
Ȕ
16
$%&' Sewing segments
Ľ
Trimming counter Ȕ
17
8 8 8 8 8 8 8 8 Number/parameter display
ľ
Light level
Ȕ
18
Ŀ
Sensor for automatic presser foot
lifting
Ȕ
19
ŀ Soft start Ȕ
20
2.2 Key Functions
S/L mark Key Name Description
Key Name Description
Parameter setting key
In the boot state, long press key to enter the parameter modes. After modify the
parameters, press key to storage. Then long press key to exit this mode.
Presser foot key
Under the normal sewing mode, press key, switch between cycle sewing midway parking
presser foot and sewing after the end of automatic trimming presser foot.
Light level button and
Shear line switch
Short press Key
ˈ
light level will change.Long press Key,circular will cut line
switch.
Voice button
At the time of an error, short press Key, will be submitted to the cause of the
problemLong press Key, Switching the horn switch
DŽ
The parameter
increment setting key
Parameter value increment key.
The parameter
decrement setting key
Parameter value decrement key.
The left selection key
Parameters selection toward to left key. ( In constant-stitch sewing mode, long press this
key, One-shot-sewing can be turned on or turned off. )
The right selection key Prameters selection toward to right key.
factory reset Long press 3 s touch switch to restore the factory program.