Store telephone numbers for voice message by entering:
7 xx... xx F y
where
xx...xx
= telephone number
y
= memory number from 1 to 4
A telephone number can have a maximum of 16 digits. A dialing
pause
can be
entered with
F0
Note: enter a pause (F0) after the last digit of a number, which is calling a
mobile phone. This way the number will be called only once and the dialer will
not check the line signals (some mobile phone systems do not generate standard
telephone line signals).
Example: to store tel. number 0 123456 to memory no. 2 enter: 7 0 F0 12345 F2
To delete a telephone number
enter:
7 F0 Fy
where
y
is a memory number from 1 to 4
To
exit user mode,
press the
N
key.
4.3 Automatic SMS sending
SMS sending can be programmed in the user mode. To switch the control panel
to the user mode enter
F 0 master code
. User mode will be indicated by a
U
on
the keypad.
If Jablotron’s SMS server service is provided in your country (check with your
distributor), the following setting allows the control panel to send alarm text
messages (SMS) automatically to a desired mobile phone:
7 xx…x F9 yy....y F7 00F9 F7zz..z F5
where:
xx…x
= telephone number of the SMS server (check with
your distributor if this service is provided in your
country)
F9
= separator (recognition of server’s reaction)
yy…y
= mobile phone number (where the SMS should be
sent to)
F7
= event code separator
00F9
= automatic event code – control panel will insert there
a digital code representing the alarm.
F7
= ID separator
zz..z
= optional ID number which will be sent as a part of the
SMS (ending). ID distinguishes which alarm system
sent the SMS). If ID is not required, do not enter
Alarm system JA-63 „PROFI“
- 12 -
MGK51501
