Thank you for purchasing the all new Series 60 LED
OPERATION - QUICK START
Although the Series 60 is packed full of features it is still simple to use. When
the unit is packed down in torch/storage mode the (on/off) switch is recessed
to prevent accidental switch on, yet is still accessible to the user when
needed.
Press once to switch on and again for off. Whenever the unit is first switched
on it will default to the 100% brightness setting regardless of how the unit
was last used. At switch on you will hear a bleep from the unit to signal all is
well, the battery status LED near to the on/off switch will illuminate to show
the units state of charge.
Always remember to put your Series 60 LED on charge after use to prolong the life of the
high capacity rechargeable battery.
CHARGING YOUR SERIES 60 LED
Whichever battery charger you have selected to recharge your Series 60 LED, it was de-
signed to be left connected indefinitely to the battery unit so your lighting product is always
topped up and ready for use. Your Series 60 LED can be charged and run at the same
time, this may be useful when using the light as an emergency back up light for if or when
the mains power fails.
It is good practice to always put your Series 60 LED light back on charge even when
used for a short period of time, leaving the unit discharged will have an adverse effect on
the longevity of the battery life. All the chargers supplied show a combination of lights to
indicate each point of the charging process. For more details on charging please see the
separate instructions included with the charger.
NOTE always charge your Series 60 LED in a dry well ventilated environment away from
minors.
Plug charger into spare
socket on rear of unit
Summary of Contents for 60 LED Series
Page 1: ......
