OPERATION - ADVANCED FEATURES
To use the unit simply press the on button and the light will come on to 100% power/
brightness and is ready for use, the additional buttons listed below allow other features
to be accessed.
(Button 1) = ON/OFF
(Button 2) = MODE - Flashing, SOS, Alternate flashing (between inner and
outer LED arrays).
(Button 3) = BRIGHTNESS - 100%, 125%, 8%, 25%, 50%, 75%.
(Button 4) = SELECT - Inner, outer, both inner and outer LED arrays.
(Button 1) – Used for switching the unit either ON or Off. Note that after switching off
allow a few seconds before switching back on to allow the system to shut down then
restart as it checks its battery status.
Button 2/3/4 – Used to put the light into different profiles as listed above.
Switch on the unit (button 1), select a mode (button 2), then select brightness
(button 3), and next select a channel (button 4) as required.
In addition you can mix and match modes between the two channels, for example you
can switch ON (button 1), select a brightness (button 3), select a channel (inner
for example, button 4) then select a mode (button 2, SOS second press). Next select
a channel (button 4, outer for example), then select a mode (button 2, flashing or
static) then select the channel (button 4) to bring both channels on to create different
light options.
Pressing and holding the (brightness) button allows dimming up and down regardless
of what brightness mode the unit has been set at.
Battery Status
MODE
SELECT
MODE
SELECT
MODE
SELECT
SELECT
MODE
SELECT
MODE
SELECT
Summary of Contents for 60 LED Series
Page 1: ......
