background image

The next change is when the LED indicator changes from amber to red; here again
the user will hear an audible bleep and see a blink of the main LEDs to signal another 
change nearer to the end of battery duration.

Finally the indicator LED will change from constant red to flash-
ing red where upon the lamp brightness will default from any 
of the power settings down to 25%, the beeper will then sound 
every 30 seconds and at the same time the main LEDs will blink 
once. This process will continue until the battery voltage falls to 
a point where the unit will automatically switch off. This process 

will give users adequate time to retreat to an area of safety
without being left in the dark.

The light cannot be switched back on until the battery has been 
recharged to prevent deep discharge and possible irreversible dam-
age to the battery.

Performance

The Series 60 uses 30 high power 3 watt LED’s to produce a crisp 
white light ideal in a working environment. To efficiently harness and 
project the light this unit has a bespoke lens array with the addition 
of an infinitely variable focusing system. In addition, conscious of 
the lack of an infinite power source, we have developed a market 
leading LED driver system to ensure very little energy is wasted with 
the majority being converted to light to give a better, brighter light 
for longer.

Stability

The unit features a pair of fold-out stability enhanc-
ing legs that allow the unit to become an effective 
tripod system without the need to carry additional 
equipment.

Height

Additional height can be achieved with the optional 
four quicklok extension poles. This extends the 
height of the light head from 820mm to 1800mm. 
These uniquely designed interlocking poles allow a 

very simple but unjamable system that 
can be quickly deployed yet store in a 
bespoke retainer on the unit when not 
needed.

Remote control system

The optional remote control system allows 
complete control of brightness, modes and 
battery status allowing the unit to be placed 
out of reach yet with full control at your 

Summary of Contents for 60 LED Series













Reviews: