46
Chapter 4
BIOS Setup
Suspend Mode
This field specifies the time after which the system enters power-
saving mode. It is available only when the Power Management
field is set to User Define.
[Options: 1Min to 1Hour, Disabled (Default Value)]
Soft-Off by PWR-BTTN
This field specifies the function of system housing power button.
Instant-Off (Default Value):
When power button is pressed, the system turns off immediately,
Delay4 Sec:
When the power button is pressed for four seconds, the system
turns off.
WakeUp\PowerOn by PCI card
When enabled, the system can "power-on" or "wake-up" via
activity from a PCI rev.2.2 card when a "PME" event occurs.
[Enabled, Disabled (Default Value)]
WakeUp\PowerOn by Ring
When enabled , the system can "power-on" or "wake-up" via
activity from an external modem connected to the PC.
[Enabled, Disabled (Default Value)]
Resume by Alarm
When enabled, you can set the date and time to automatically
"wake-up" your PC (similar to an alarm clock).
Enabled:
Setting to Date (0-31) and Timer (hr,min,sec) to power-on the
PC.When date is set to 0, the Timer is set for every day.
Disabled (Default Value):
Disable RTC alarm function.
IRQ1~IRQ15
If set to Enabled, the specified IRQ line will prevent the system
from entering power saving modes.
Enables or disables the monitoring of the specified IRQ line.