35
Chapter 4
BIOS Setup
Quick Power On Self Test
This field allows the system to skip certain tests while booting.
This will decrease the time needed to boot the system.
[Enabled(Default Value), Disabled]
First / Second / Third / Boot Other Device
The BIOS attempts to load the operating system from the devices
in the sequence selected in these items.
[Floppy, LS120, HDD-0, SCSI, CDROM, HDD-1, HDD-2,
HDD-3, ZIP100, USB-ZIP, USB-CDROM, USB-HDD, LAN,
Disabled]
Swap Floppy Drive
When enabled, floppy drives A and B will be exchanged without
the user physically changing the connection on the cable.
[Enable, Disabled(Default Value)]
Boot Up Floppy Seek
Seeks disk drives during boot up. Disabling speeds boot up.
[Enabled(Default Value), Disabled ]
Boot Up NumLock Status
This field determines the configuration of the numeric keypad
after system boot up. If On, the keypad uses numbers keys. If
Off,the keypad uses arrow keys.
[ON(Default Value),Off]
Gate A20 Option
This field configures how the gate A20 is handled. The gate A20
is a device used to address memory above 1 MB. Don’t change
th default.
[Fast(Default Vaule):GateA20 signal supported by core logic]
[Normal: GateA20 signal supported by keyboard controller].