
41
Chapter 4
BIOS Setup
On-Chip USB Controller
Select Enabled if your system contains USB peripherals.
[Enable, Disabled(Default Value)]
USB Keyboard Support
Select to Enabled if you want to use USB keyboard under DOS.
[Enable, Disabled(Default Value)]
Init Display First
This item allows you to decide which slot to activate first, either
PCI slot or AGP slot.
[PCI Slot, AGP(Default Value)]
IDE HDD Block Mode
When enabled, the IDE controller will use the faster block mode
to access devices.
[Enabled(Default Value), Disabled]
Power-On Function
The following two fields configure system Power-On modes.
KB Power-On Password
Sets a password to control the keyboard power-on feature.
Hot Key Power On
Assigns a hot key combination that will execute a keyboard power
on command to turn on the system from the keyboard.