42
Chapter 4
BIOS Setup
KB Power-On Password
If you wish to use this function, highlight the field then press
<Enter>. The computer will display the message “Enter Pass-
word”. Type in a password is displayed and re-type it at the
prompt. The KB Power-On function will be in effect after you
Save and Exit Setup.
To disable a password, highlight the field again and press <En-
ter>. The computer will display the message “Enter Password”.
Press <Enter>. A message will confirm that the password is
disabled.
Hot Key Power-On
This field specifies key selection for the Keyboard-Power-On hot
key.
[Ctrl-F1 through Ctrl-F12]
Onboard FDC Controller
This field enables or disables the onboard floppy controller.
[Enabled(Default Value),Disabled]
Onboard Serial Ports
These fields configure the onboard serial ports. There are several
port addresses and IRQ channels to select from. The defaults are
the standard assignments for these ports.