12
Step 10. Install the Keylock
Most computer cha ssis will provides a keylock switch.
Norma lly connect the ma rked keylock connector to the
motherboa rd keylock. This will ca use the keyboa rd out of
function once you switch the keylock to “Lock”. This will
prevent a ny un-a uthorized keyin.
Step 11. Install the Speaker
Connect the speaker to the motherboard’s speaker connector.
(norma lly the red ca ble is +5V power) Or follow the Cha pter-0
Quick Insta lla tion Step 2, if you use the P55TV/TVS CPU
cooler or reference to the CPU Cooler’s operation manual)
Step 12. Install the Power LED
Some computer cha ssis provides a power LED for identify if
the system is on or off. Connect the power LED to the
motherboard’s TB LED connector. (normally the red cable is
+5V power)
Step 13. Install the Devices LED
RST
SCSI
IDE
SMI
LED
SPEAKER
KEYLOCK
1
1
1
Some computer cha ssis provides a device LED(Lik e HDD LED)
for identify if the device is under working or not. Connect the
device LED to the motherboard’s IDE/ SCSI LED connector.
(norma lly the red ca ble is +5V power)
Step 14. Install the Power Input
This SCSI motherboa rd provides two type of power input, the
AT & ATX for different choises.
The ATX power provides 1 set 20 pin cable for motherboard’s
power input. Once the ATX power wa s pla ced on this system,
