IWILL MPX2, User Manual, Page: 75 / 106

5: System Configuration
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
User’s Manual 5•17
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
PnP/PCI Configurations
Section Function
Configures Plug and Play and other PCI bus settings.
Default & Autodetected Settings
The default is for the BIOS to control these functions.
Setting Options & Constraints
Don’t change the resource settings, they’re set to be
handled automatically by the BIOS. If you have a prob-
lem after you install an expansion card, set Reset Con-
figuration Data to Enabled to rewrite the ESCD. You can
set them manually by setting the Resources Controlled
By line to the Manual setting.
Normally you should leave the PCI/VGA Palette Snoop
feature disabled unless you have a PCI display card in-
stalled and it has a display problem at startup.
CMOS Setup Utility – PnP/PCI Configurations