IWILL MPX2, User Manual, Page: 24 / 106

MPX2 Motherboard
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
User’s Manual 2•10
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Other Internal Connectors
There are several other connectors on the motherboard.
Power Connectors
Function: Connectors for leads from the system power
supply.
Description: There are two power connectors on the
motherboard. These are for either an ATX or EPS power
supply. The power supply leads plug into the connec-
tors. The connector design prevents incorrect orientation.
These are not standard ATX connectors. The 24-pin and
8-pin connectors are for both ATX and EPS dual power
connector power supplies. The EPS connectors plug into
the entire onboard connector. The ATX connectors only
plug into part of each connector.
More Information: Please refer to Chapter 4, “Installing
the Board in a System Housing”. Chapter 7 lists technical
specifications.
Power Connectors:
The power connectors are
for use with either an ATX
or EPS minimum 350W
power supply.
24-pin EPS/ATX connector
(ATX uses 20 pins)
Cooling Fan Connectors J11, J24, J3, J27, J28
Function: Power connectors for CPU and system hous-
ing cooling fans.
Description: There are three system housing cooling fan
connectors (J28 – System, J3, J27 – Aux) and two CPU
cooling fan connectors (J11 & J24) on the motherboard.
All the connectors are 3-pin headers. The System hous-
ing and CPU fan connectors support fan speed monitor-
ing in the PC Health section of the CMOS Setup Utility.
EPS/ATX 12V connector
(ATX uses 4 pins)
ATX connectors
plug into the
indicated
positions