IWILL MPX2, User Manual, Page: 51 / 106

4: Installing The Motherboard
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
User’s Manual 4•7
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
3. Repeat the process on the opposite side. Keep hold-
ing the Fan/Heatsink steady. Press the end of the
retention clip over the corresponding lug extension
so that it snaps over the lug securely. Make sure the
Fan/Heatsink assembly is positioned directly over
the CPU and is not in contact with the socket.
Connect Fan/Heatsink Power Lead
Plug the fan power lead onto the CPU Fan power connec-
tor near the CPU socket. When you do this the CPU in-
stallation is complete.
Step 3:
Hold the Heatsink/Fan as-
sembly steady and press
the other retention clip
end over the other match-
ing lug extension so that
it clips on securely.
Step 4:
Plug the Fan power lead
onto the CPU fan power
connector
If you are installing a dual CPU configuration, repeat this
procedure to install a second Athlon MP CPU in the sec-
ond CPU socket.
Fan power lead plugs
onto the closest CPU
fan power connector.