IWILL MPX2, User Manual, Page: 100 / 106

MPX2 Motherboard
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
User’s Manual 7•2
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Processor I/F (Socket A)
Supports 2 processor through Socket A (462pin)
Supports 266MHz FSB (Front Side Bus)
Supports Dual AMD Athlon MP processors or single AMD Athlon XP & Duron processor
(For Dual purpose, required the same CPU ID processors)
CPU Frequency/Voltage Select
Supports Vcore selection by BIOS
Supports VIO selection by Jumper
Supports CPU Ratio Speed selection by BIOS (5X to 15X)
Supports CPU External Frequency selection by BIOS (up to 250MHz)
Support FSB 100/133MHz Jumper setting
Chipset:
AMD760MPX Chipsets
North Bridge AMD762
South Bridge AMD768
Memory
Supports DDR200 (PC1600) /DDR266 (PC2100)
Supports Unbuffered DDR Memory up to 2GB (1GB x2 using DIMM1 & DIMM2 only)
Supports 64M/128M/256M/512MB/1GB DDRAM Module
Supports Registered DDR Memory, Up to 3.5GB (1GB x 3, 512MB x 1)
Display Graphics:
Supports AGP2X (3.3V)/AGP4X (1.5V) and AGP Pro
General I/O
PCI Slots:
PCI 2.2 compliance
Supports 32-bit/33MHz PCI interface
Supports 64-bit/66MHz (3.3V)
Supports ATA33/ATA66/ATA100 IDE interface
Supports Floppy interface
Supports 16550A UART interface
Supports ECP/EPP interface
Supports PS2 interface
Supports SIR interface
Supports USB1.1 interface
Management