IWILL MPX2, User Manual, Page: 25 / 106

2: Key Features & Components
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
User’s Manual 2•11
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
The power to the Auxiliary fans J3 and J27 is turned off
by default. You can turn the power to these connectors
on in the IWILL Smart Setting section of the Award BIOS
CMOS Setup Utility by setting the AUX Fan item to the
ON setting.
More Information: Please see the PC Health Status and
IWILL Smart Setting sections of “Configuring the CMOS
Setup Utility” in Chapter 5 for information.
WOL: Wake On LAN Connector J6
Function: A connector for the lead from a Network Inter-
face Card that supports the Wake On LAN feature.
Description: This feature enables the system to “wake
up” from Suspend mode when it receives a signal over a
LAN it is connected to. It works with a PCI NIC that
supports this feature by connecting the card to the WOL
connector on the motherboard.
More Information: Please see the Power Management
Setup section of “Configuring the CMOS Setup Utility”
in Chapter 5 for information.
Fan power connectors
(orientation varies)
Cooling Fan Connectors:
The cooling fan power
connectors all use the
same 3-pin connector.
Wake On LAN Connector:
This connector is for an
additional NIC. The op-
tional onboard LAN port
supports WOL without us-
ing this connector.
Wake On LAN connector