Rev 1.1
Page 40 of 61
i.MX6 Pico ITX - SBC Hardware User Guide
iWave Systems Technologies Pvt. Ltd.
2.7.2
JTAG Connector
A customized 20-pin ARM JTAG connector is available in i.MX6 Pico ITX – SBC for Debug purpose. 3.3V
reference power is provided to pin 1 of the connector to allow JTAG tool to automatically configure the
logic signals for the right voltage. JTAG connector is physically located on bottom of the board.
Number of Pins
- 20
Connector Part Number - GRPB102VWQP-RC
Mating Connector
- LPPB102CFFN-RC from Sullins Connector Solutions
Figure 17: JTAG Connector