Rev 1.1
Page 34 of 61
i.MX6 Pico ITX - SBC Hardware User Guide
iWave Systems Technologies Pvt. Ltd.
2.6.3
USB Host Connector
i.MX6 Pico ITX – SBC supports three High Speed (HS) USB 2.0 host. To support 3 USB hosts, the i.MX6
Pico ITX – SBC uses 1 to 4 port USB hub “USB2514Bi”.This USB hub is interfaced with i.MX6 usingi.MX6
integrated High Speed USB Host PHY. Two USB Ports from the USB hub are connected to Dual stack Type
A connector and 1USB Port is connected to Mini PCIe. This Dual Stack Connector is located on top of the
board as shown below.
Figure 13: USB Dual Stack Connector