Rev 1.1
Page 44 of 61
i.MX6 Pico ITX - SBC Hardware User Guide
iWave Systems Technologies Pvt. Ltd.
2.8
Expansion Connector
i.MX6 Pico ITX –SBC supports one 84pin expansion connector for add-on features. This connector is
physically located at the top of the board. Below mentioned interfaces are supported in Expansion
Connector.
LVDS1 Interface
MIPI DSI Interface
CSI0 Camera Interface
CAN Interface
SPI Interface
UART Interface x 3ports
I2C Interface x 3ports
GPIOs
MLB 6pin & 3 pin Signals
Note: MLB is not supported in i.MX6 Dual-Lite & Solo CPU.
Number of Pins
- 84
Connector Part Number - TMM-142-01-T-D (Single 84 pin connector is used)
Mating Connector
- M22-3022100 from Harwin Inc (Use single of this 84 Pin connector)
