Iwatsu DCKT970, Owner'S Manual

Page: 88 / 172

Digital Telephone User’s Guide - 78
Floating Outside Line Group Access
Allows for a number of outside lines to be assigned to one of 60 groups.
These groups may be used for incoming calls, outgoing calls or both
incoming and outgoing calls.
Operation
To access an outside line group:
Lift the receiver
Press the Float button
FLT then dial the outside line group
number
1
–
10
for the desired group
Or
Press the Float button
FLT
for the desired group if that group
is assigned as a Float button on a Multipurpose button
Forced/Verified Account Code
Requires you to enter a 1-12 digit code to make outside calls. These codes
may be either fixed or variable in length and each telephone may be
programmed for one of the four following account code entry options.
FORCED-TOLL: code entry required only for toll calls
FORCED-ALL:
code entry required for all calls
VERIFIED-TOLL: valid code entry required only for toll calls
VERIFIED-ALL: valid code entry required for all calls
A table of 10 phone numbers may be programmed to allow calling without
account code entry. This option is very helpful because it allows important
emergency numbers to be dialed by anyone. The verification table, for
verified account code entry, shares memory with System Speed Dial and
may contain 80 account codes. The Forced/Verified Account Code
programming allows the option of having or not having the account
displayed on the LCD of the phone and the SMDR printout.
Operation
Lift the receiver
Press an outside line button
Wait for the dial tone
Dial the desired phone number
Dial
*
Wait for the account code entry tone
Dial a code
Dial
*
only if your code entry is variable in length