Iwatsu DCKT970, Owner'S Manual

Page: 132 / 172

Attendant Position Features - 122
Night Mode
Allows you to change the ringing termination point for outside lines. This
alternate point might be a loud bell, a phone or a group of phones. A
programming option may be enabled to allow ADIX-VS to automatically
switch to the Night Mode at a certain time; however, you must manually
switch the system back to the normal mode.
Operation
To place the system in Night Mode operation:
Press the Speaker button
SPKR
Wait for the dial tone
Press the Night Mode button
NIGHT and the lamp for that
button will be solid red
Wait for a confirmation tone
Press the Speaker button
SPKR
To disable Night Mode operation:
Press the Speaker button
SPKR
Wait for the dial tone
Press the Night Mode button
NIGHT and the lamp for that
button will be off
Wait for a confirmation tone
Press the Speaker button
SPKR
Operator Priority
The system operator has the ability to override any ringing or voice
announce intercom call or paging call. This occurs when calls are made
simultaneously, or another party other than the operator makes the call first.