12
switching on for the first time
setting the time
When the unit is first connected to the mains supply it will
enter Standby mode and the clock will flash.
You should now set the time.
Example
: Set the time at 4:30 pm (16:30)
1. Press and hold CLOCK SET/MEM RECALL on the control panel
or press and hold CL.ADJ. on the remote control.
The hours will start flashing.
2. Press either TUNE/SKIP button on the control panel or remote
control to set the hours.
3. Press CLOCK SET/MEM RECALL on the control panel or press
CL.ADJ. on the remote control
The minutes will start flashing.
4. Press either TUNE/SKIP button on the control panel or remote
control to set the minutes.
5. Press CLOCK SET/MEM RECALL on the control panel or
press CL.ADJ. on the remote control to store the time in
the memory.
The clock is a 24 hour clock.
The unit must be in standby mode before you adjust the clock.
IHFUSBN13_IB.indd 12
14/06/2013 14:41