16
program play
You can program up to 20 tracks. Ensure a CD is not playing before setting a program.
Setting a program
1. Press MODE/MEM SET/PROGRAM on the control panel or
the PROGRAM button on the remote control.
The ‘PROGRAM’ indicator lights. The display flashes “P01”.
2. Press a TUNE/SKIP button to select the track.
3. Press MODE/MEM SET/PROGRAM on the control panel or
press the PROGRAM button on the remote control to store
the selection.
The display flashes “P02”.
4. Repeat steps 2 to 3 to select more tracks, up to a maximum
of 20.
To play a program
Press the PLAY/PAUSE button. The program will play once and
then stop.
•
When a program is in play the PROG icon displays.
•
In ‘Program’ mode, if you stop the CD the PROG icon displays
to tell you that the program is still retained in the memory.
To replay the program
Press the PLAY/PAUSE button.
To erase the program
Press the STOP button twice.
•
Switching to another source or opening and closing the CD door will stop the CD and
erase any program contents.
•
Setting the unit to Standby will also stop the CD and erase any program contents.
IHFUSBN13_IB.indd 16
14/06/2013 14:41