14
FM radio
selecting FM
Press SOURCE on the control panel or SOURCE on the remote
control to select FM.
programming a radio station
Manual Tuning: Press a TUNE/SKIP button on the remote control or the control panel.
The radio will scan up/down the band in 100kHz steps.
Auto Tuning: Press and hold a TUNE/SKIP button.
The unit will scan up/down the band. When a usable station is detected the scan will stop
and the station will play .
storing a station in the memory
Up to 20 radio stations can be stored in the memory.
Manual Preset Storage
1. Tune the desired station.
2. Press the MODE/MEM SET/PROGRAM button on the control
panel or the MEM RECALL button on the remote control.
The display will flash the first available preset location.
3. Accept this location or press TUNE/SKIP on the control panel
or M+/M– on the remote control to select an alternative.
4. Press the MODE/MEM SET/PROGRAM button on the control
panel or the MEM RECALL button on the remote control
to store the station.
5. Repeat steps 1 to 4 to store more radio stations in the memory.
Automatic Preset Storage
1. Press the MODE/MEM SET/PROGRAM button on the control panel or the MEM
RECALL button on the remote control.
2. Press the PLAY/PAUSE button on the control panel or the remote control.
The unit will tune automatically, storing stations in the memory. When all 20 preset
locations are filled (or when the band has been scanned if fewer than 20 stations are
available) the scan will stop and the first station found will play.
recalling a stored station
•
From the control panel: Press and hold CLOCK SET/MEM RECALL until the wanted
preset number appears. Release the button to play the station.
•
From the remote control: Press and hold either the M+ or M– button until the
wanted preset number appears. Release the button to play the station.
When you use auto-tuning only stations with strong signals are detected.
Weaker stations should be tuned manually
IHFUSBN13_IB.indd 14
14/06/2013 14:41