13
basic operation
standby control
•
Press STANDBY/ON on the control panel or STANDBY on the remote control
to switch the unit on.
•
Press the button again switch the unit to standby mode.
selecting a source
1. Switch the unit on.
2. Press the SOURCE button on the control panel or the remote control to cycle through
the input sources:
bt (Bluetooth mode)
FM Radio
CD
AUX
altering the volume
Press the VOL +/- buttons on the remote control or the /-
buttons on the control panel to alter the volume.
•
The volume range is 00-30. When you adjust the volume the
new level is briefly displayed on the screen.
Muting the volume
1. Press the MUTE button on the remote control to mute the volume.
The volume level flashes continuously on the screen.
2. Press the MUTE button again to restore the volume.
(Changing the source or altering the volume will also restore the volume).
altering the tone
Repeatedly press the EQ button on the remote control to adjust the sound quality.
Select from one of the 5 preset equalizer settings:
POP
JAZZ
CLASSIC ROCK
FLAT
In Bluetooth or CD mode, if there is no available source (no bluetooth device
or no CD in the tray), the unit will revert to Standby after a few minutes.
If you set the unit to Standby after you have been listening at a high volume
when the unit next powers on it will come on at this high level !
IHFUSBN13_IB.indd 13
14/06/2013 14:41