IWAKI EWN -B16 TC, Instruction Manual, Page: 54 / 116

54
Operation programming
Push the EXT key and call up the multiplier programming screen.
Use the UP or DOWN key to program a divisor.
• A divisor increases/decreases as pushing the UP/DOWN keys.
• Press and hold either key for more than three seconds for quick
change. Quick change stops at 1 or 9999. 1 or 9999 skips to 9999 or 1
when the key is released and pushed once.
Push the EXT key to return to the EXT mode selection.
Push the start/stop key to return to EXT mode.
The pump starts to run according to the multiplier programming.
Flow rate display changes every time the Disp key is pressed.
5
4
ON
STOP SET
ON
STOP SET
DIV
SET
DIV
SET
DIV
ON
STOP SET
DIV
ON
STOP
SET
ON
STOP
ON
STOP SET
DIV
%
6
7