- 29 -
Operation
2-3-4. Selection of pulse dividing/pulse multiply
1) Turn on power
ON
STROKE RATE
ON
STROKE RATE
When power is turned on for the first time, program version is
shown briefly and the manual waiting mode appears. On and after
the second time pump is turned on, the pump restarts in the EXT
operation mode with "EXT" indication on the display if the pump
was in EXT operation mode at the last power-off.
If "STOP" or "-STOP" indication is displayed, the STOP function
is active. First, release STOP function. Refer to page 35 for how to
release the STOP function.
2) Move to the EXT mode
Push key to move to the selection display of pulse dividing/
pulse multiply.
4) Select the pulse dividing or pulse multiply.
ON
STROKE RATE
Push key as pressing key in the manual waiting mode to
move to the EXT mode. Do not input any signals at this phase.
3) Move to the selection display of pulse dividing/pulse multiply
ON
STROKE RATE
Push or key to select the pulse dividing or pulse multiply in
the selection display.
