- 10 -
Installation
1. Before installation
"Strictly observe the following points.
"
Operators and maintenance service staff must read the instruction
manual thoroughly before installing the products. Do not operate the
pump system unless all of the contents in this manual are completely
understood.
●
Dropping the pump or subjecting
it to strong impacts may result in
faulty performance. Handle the
pump with care.
●
When installing the pump, avoid
places where...
• The pump is exposed to direct
sunlight or rain.
• Ambient temperature is 40 deg.
C or more.
• Relative humidity is 85% or
more.
Though the pump has a simple
waterproof and dustproof structure,
do not install it outdoor.
●
Select an installation site convenient
for future maintenance and inspec-
tion, and fix the pump on a flat
floor free of vibrations.
2. Precaution on handling
Warning
●
Turn off power
Working with power ON may cause an electrical shock. Before
working on the pump, make sure turn off main power.
●
Terminate operation
On detecting or becoming aware of any dangerous sign or abnor-
mal condition in operation, terminate the operation immediately
and start it from the beginning again.
●
Specified power only
Be sure to connect earth wire. Do not apply any power other than
specified power on nameplate.
●
Keep the pump away from heat or flame
Do not place any dangerous materials or flammable objects near
the pump for the prevention of fire or accident.
●
Damaged pump
Never operate any damaged pump. A damaged pump may cause
leakage or electrical shock.
