50 Operation programming
Multiplier programming
Program the number of shots per signal to control the pump. The number of
shots can be programmed from 1 to 999.
NOTE
Do not enter the EXT signal during the programming.
Enter EXT mode.
•
Push the DOWN key while pressing the start/stop key to move from
manual mode to EXT mode.
•
Push the start/stop key and stop the pump when the pump is running.
Then call up EXT mode.
Push the UP key and enter the Multiply/Divide selection.
Select "X NNN" (Multiply).
"X NNN" (Multiply) or "/ NNN" (Divide) can be selected by the UP and
DOWN keys.
ON
STROKE RATE
ON
STROKE RATE
ON
STROKE RATE
ON
STROKE RATE
ON
STROKE RATE
ON
STROKE RATE
2
1
3
Summary of Contents for EHN-R
Page 91: ...91...
