O. Tester for lights
This tester servers for testing continuity of various lights, such as halogen, pin base, plug-in socket lights, filament lamps
with different sockets, flashlight bulbs etc.
Turn on the device with switch
J
. If the light is intact the buzzer sounds and the green LED
R
lights.
P. Tester for continuity of fuses
Turn on the device with switch
J
. If the fuse is intact the buzzer sounds and the green LED
R
lights.
Q. Tester of 9 volt batteries and accumulators
Turn on the device with switch
J
and set the nominal voltage of the cell to be tested to 9 volt with switch
L
. The test result
can be read on LED display
K
.
R. Buzzer and green LED
Acoustic and optic display in case of positive continuity check.
Inserting the 9 volt compound battery:
In new condition or if it is run down.
Replace a new battery
Technical specifications
Operating voltage:
230 V / 50 Hz
Supply voltage of LED display 9 volt compound battery
Fuse:
F
3.15A
L250V
Dimensions:
265 x 195 x 50 mm
Weight:
740 g
The pack contains:
Battery and light tester PL-580, testing wire, 9 volt compound battery, operating instructions
Environmental protection notice
At the end of its useful life, this product must not be disposed of together with normal household waste, but has to
be dropped off at a collection centre for the recycling of electrical and electronic devices. This is indicated by the
symbol on the product, on the instruction manual or on the packaging. The materials of which this product is
made are recyclable pursuant to their labelling.
With the reuse, the recycling of the materials or other forms of scrap usage you are making an important
contribution to the protection of the environment.
Please ask your local administration office for the appropriate disposal centre.
Technical specifications are subject to change. We assume no liability for typographical errors. 12/2009
IVT Innovative Versorgungs-Technik GmbH, Dienhof 14, D-92242 Hirschau
Phone: 09622 – 719910, Fax: 09622 – 7199120