IVT GCHS-25, Manual

Page: 16 / 76

16
EN
Instruction manual
wash it or replace with a new one if needed.
Storing
∙ After operation, store the machine only with the
cutting unit covered.
∙ Do not lay any items onto the tool, during storage.
∙ Should the machine be stored for an extended
period of time, empty the fuel and oil out of the tank.
Remove spark plug (25). Remove the cutting unit, place
the saw chain (6) and guide bar (7) into an oil bath for a
short time, following that, wrap them up in oiled paper.
ENVIRONMENTAL PROTECTION
Recycle raw materials instead of
disposing as waste.
Tool, accessories and packaging should be sorted for
environment-friendly recycling.
The plastic components are labeled for categorized
recycling. These instructions are printed on recycled
paper manufactured without chlorine.