CHASSIS MODIFICATIONS
2-73
D
AILY
4x4
Print 603.93.761
Base - May 2007
Electrical System: Modifications and Drawing-Off Power
Maxifuse and megafuse fuses
Fuse holder are available at the IVECO shops, to protect high-absorption current drawing.
They shall be positioned (as near the battery drawing terminal as possible) by the body builder depending on the space available
on the vehicle.
Figure 2.44
119357
Capacity
IVECO ref.
no.
Cable section
Capacity
IVECO ref.
no.
Cable section
KIT 40A
4104 0110 KZ
10 mm
2
KIT 100A
4104 0112 KZ
25 mm
2
KIT 60A
4104 0111 KZ
10 mm
2
KIT 125A
4104 0113 KZ
35 mm
2
KIT 150A
4104 0114 KZ
50 mm
2
It should be pointed out that the current intensity shall, when grouping several cables, be reduced compared with the rated value
of one single cable in order to compensate for smaller heat dispersion.
As regards the vehicles the engines of which are frequently started, in the presence of current drawing and short engine rotation
time (e.g. vehicles equipped with refrigerating bodies), the battery shall be recharged at regular intervals in order to ensure efficiency
of the same.
The connections with plugs and terminals shall be of the protected, weather-proof type. Components of the same type as the one
originally fitted to the vehicle shall be used.
In the event that units and assemblies (various components, etc.) need be relocated due to special body building or vehicle
conversion, such relocation shall be permitted providing:
In the event that a component has be installed just next to the route of a cable belonging to the original system, or a cable route
needs be changed, the same can be relocated provided that its integrity is maintained (cuts shall not be made).
Figure 2.45
!
Any damage caused by the failure to comply with the procedure shall not be covered by the warranty.
The airbag system components must not be displaced or tampered with for any reason whatsoever.
Summary of Contents for DAILY 4x4
