Iveco DAILY 4x4, Instructions Manual, Page: 38 / 110

2-14
CHASSIS MODIFICATIONS D
AILY
4x4
Base - May 2007 Print 603.93.761
Drilling the Chassis
Table 2.9 - Daily: truck chassis dimensions, section and thickness
Class Type
Wheelbase
[mm]
Chassis rear
overhang
[mm]
A x B x t
wheelbase area
side member
section [mm]
A x B x t
rear overhang area
side member
section [mm]
35S18W 55S18W truck
3050 801
134 x 60 x 5 134 x 60 x 5 35S18W - 55S18W truck
3400 962
134 x 60 x 5 134 x 60 x 5
2.3.3 Stresses on the chassis
Do not exceed the following stress values under static conditions:
Table 2.10
Range Permitted static stress on the chassis (N/mm
2
)
σ
amm.
Off-road use
Daily 4x4 100
When prescribed by national regulations, the bodybuilder must check that the stress limits are not exceeded.
Welding activity will cause a deterioration in the characteristics of the material. Therefore, when checking the stresses in thermically-
modified zones, consider a reduction of approx. 15% of the resistance characteristics.