Iveco DAILY 4x4, Instructions Manual, Page: 34 / 110

2-10
CHASSIS MODIFICATIONS D
AILY
4x4
Base - May 2007 Print 603.93.761
Protection against Rust and Painting
2.2.2 Added or modified painted parts
All parts of the vehicle (cab, chassis, bodywork, etc.) which are added or subjected to modification must be protected from rust
and corrosion.
There must be no unprotected areas on ferrous materials.
Table 2.4 (painted) and Table 2.5 (unpainted) show the minimum treatments required for modified or added components when
it is not possible to provide the same protection as that used on IVECO original components. Different treatments are allowed
on condition that the same level of protection against rust and corrosion is guaranteed.
Never use powder enamels directly after degreasing.
Parts in light alloy, brass and copper must not be protected.
Table 2.4 - Added or modified painted parts
Description of the cycle phase
Class
Description of the cycle phase
A - B - D (1)
Mechanical surface cleaning (including the removal of burrs / rust Mechanical surface cleaning (including the removal of burrs / rust
and cleaning of modified parts)
Brushing/sanding/sand blasting
and cleaning of modified parts)
Brushing/sanding/sand blasting
Pre-treatment Degreasing
Anti-rust Bicomponent (30-40
µ
m) (2)
Paint Bicomponent (30-40
µ
m) (3)
(1) = Modifications to rear axles, front axles and engine (Classes B1 and C) are not allowed.
(2) = Preferably epoxy.
(3) = Preferably polyurethane.
Table 2.5 - Added or modified unpainted and/or aluminium parts
Type of protection
Class
Type of protection
A — B (1) D
Stainless steel
yes
-
Dacromet (1)
yes
-
Zinc treatment (1) - yes
(1) = Hexavalent chromium-free.