ITS Telecom CGW-D, Installation And Operation Manual, Page: 46 / 59

CGW-D
3-21
Operation Command Default
Silence detection timer. Time interval, when
gateway detect a silence for to disconnect a call *531 +XX, where:
XX = time in minutes (00-99) 99
CLIR (Calling Line Interface Restriction).
The CGW-D can restrict its SIM telephone
number display.
*550 + X, where:
X = 0, off
X = 1, on
1
Call Back/Call Through Subscribers Timer Reset
Day
*560 + XX, where:
XX = 01-28
1
Enabling Call Back/Call Through restriction
table.
*561 + X, where:
X=1 – Restriction table enabled
X=0 – Restriction table disabled
1
Call back/Call Through Subscribers restriction
table (black list). *562 + XX + YY..YY + #, where:
XX = 01 – 30 (list number of restricted
numbers)
YY..YY = Up to 8 Restricted digits (0 – 9,
*, #)
Clear restriction list: 562+*1
'**' for '*', '*#' for '#'
None
Maximum number of digits for Public Call
Through calls *564 + X,
where X=0-9 0 – Public Call
Through mode
disabled
Call Back/ Call Through first digit operation.
Specify operation, which the Gateway will
implement if a Call Back/Call Through
subscriber expired First Digit time out time
interval. Options: To disconnect, or to pass a
call to the Phone/PBX trunk (FXS) direction
*565 + X, where:
X=0 – Disconnect
X=1 – Forward to phone (FXS)
Audio signaling (beep) for outgoing cellular call
indication *587 +X, where:
X=0 – disable
X=1 enable
1
Change programming password *600 + new password, where: password
must be 4 digits long (only digits, 0-9)
1234
Set Auto-Attendant back to factory default *654+* + admin pswrd +#
Enter the Programming mode.
*900 + XXXX, where:
XXXX = password
0000 = master password.
1234
Exit the Programming mode *900