background image

z

Always use care when handling the hard drive. Do not drop, bend, flex, or crush it. 

z

Avoid exposing the PC Card hard drive to extreme moisture, heat, or sunlight. 

z

Keep all debris out of the connector to ensure good electrical connections. 

z

There are no user repairable parts in the PC Card hard drive. Do not attempt to disassemble any 
part of the hard drive. The warranty will be voided if drive seals are broken or screws have been 
removed.

z

Periodically backup or archive important files and data. 

If you encounter or suspect hard drive problems, you can run SCANDISK, which provides a description 
of file usage and syntax on selected drives.  SCANDISK will identify any failures on the hard drive and 
prompt you for corrective action based on selected options. If problems are found, it may be necessary 
to run SCANDISK several times to determine the extent and severity of the problem. SCANDISK may 
discover multiple bad clusters. Up to ten bad clusters can be allowed before returning the computer for 
service. After you have run SCANDISK and the problem persists or becomes more severe, or if 
SCANDISK finds more than ten bad clusters, return the unit for service. 

To run SCANDISK in WIN2K and WINXP right click on the drive letter, go to properties, and select 
the tools tab, Error-checking and click check now.  In other Windows operating systems you can run 
SCANDISK by going to Start, Programs, Accessories, System Tools.  Then select SCANDISK. 

72_0119_001
28 June 2004

© 2004 Itronix Corporation.  All rights reserved.

Touch Screen Care 

GoBook III

®

 Help

CAUTION

z

Always use an approved stylus or your finger. 

z

Never use sharp, hard, or abrasive implements on the touch screen such as ball point pens, 
pencils, or keys.  They could damage the screen. 

z

To clean the touch screen panel, apply a household glass cleaner to a soft, clean, dry cloth 
and wipe the screen. 

Page 64 of 80

GoBook III Help

7/5/2004

file://C:\Documents%20and%20Settings\harwoodm.ITRXNT1\Local%20Settings\Temp\~h...

Summary of Contents for GoBook III




















































































Reviews: