1. Locate the 15-pin VGA monitor port on the back of the unit behind the IO door. Then connect the
video signal cable from the external monitor to the monitor port.
2. Connect the monitor’s power cable to a power outlet and turn on the monitor.
3. If the new monitor has not automatically been detected and is not displaying what appears on your
GoBook III’s LCD screen, open the Control Panel.
4. Double-tap
Display
. The Display Properties window opens.
5. Tap the
Settings
tab. Then select the
Advanced
button.
6. Tap the
S3DuoVue
tab and select the CRT box the enable display on an external monitor.
7. You can also use the
FN
+
F2
hot keys to cycle through the CRT, LCD, and CRT/LCD settings.
72_0119_001
28 June 2004
© 2004 Itronix Corporation. All rights reserved.
Disk Drives
Your computer comes with several components for reading and writing (recording) information.
The Hard Disk Drive
The
hard disk
provides high-capacity storage and fast access. Windows and most programs are stored
here. Your GoBook III identifies the hard disk drive as drive C. For information about removing or
installing the hard drive see
Hard Drive Care and Handling
.
The Floppy Disk, CD-ROM, or DVD-ROM Drive
Your computer may come with a floppy disk drive. The floppy disk drive accepts 3.5-inch floppy disks
and is read and write capable.
The CD-ROM drive is a read only drive. It cannot be used to write data to a recordable compact disk.
The CD-ROM drive can read data from CDs, including audio or video CDs. The DVD drive can read
both DVD and CD disks. Your GoBook III identifies the drive with the letter following the hard drive
letter. If you hard drive is C, then the CD-ROM drive will be D. The media bay is located on the right
GoBook III
®
Help
Page 20 of 80
GoBook III Help
7/5/2004
file://C:\Documents%20and%20Settings\harwoodm.ITRXNT1\Local%20Settings\Temp\~h...
