![ITRON 100W-R Installation Manual Download Page 6](http://html1.mh-extra.com/html/itron/100w-r/100w-r_installation-manual_2095983006.webp)
TDC-0951-005 100W-R and 100WP-R Datalogging ERT Module Installation Guide
1
Proprietary and Confidential
Document Conventions
Convention
Example
Itron product part numbers are noted in
parentheses.
To install the ERT module (ERW-1300-XXX), do the following steps.
Hypertext links are in blue.
For more information about 100W remote ERT module models, see
100W-R and
100WP-R Models
on page 4.
Note
A Note indicates neutral or positive information that stresses or supplements important points
of the main text. A note supplies information that may apply only in special cases.
Caution
A Caution advises users that failure to take or avoid a specified action could result in a loss
of data.
Warning
A Warning advises users that failure to take or avoid a specified action could result in
physical harm to the user or the hardware.
Document Purpose
This document provides installation instructions for the 100W-R and 100WP-R ERT modules including step-
by-step instructions for pipe mount, remote mount, and direct mount.
Caution
Installing a remote ERT module or an integrated 100W ERT module and meter register
in a water pit box will void the product warranty. Remote ERTs are designed for interior and
exterior (on the side of buildings) installations only. Use a pit ERT module for pit-mount
applications. (Refer to the
Water Endpoint Ordering Guide
PUB-0063-001).
How This Document is Organized
This installation guide is organized with the following chapters:
Chapter
Description
1. Before You Begin
Information about this publication
2. About the 100W-R and 100WP-R Overview of 100W-R and 100WP-R functionality.
3. Connecting, Initializing and
Programming
Instructions to initialize the 100W ERT module and connect the ERT module to the
register.
4. Installing the 100W-R and
100WP-R
Step-by-step ERT module installation instructions for:
Pipe mount
Optional Leak Sensor
Remote mount
Direct mount
Appendix A Using Gel-cap
Connectors
Instructions for using gel-cap connectors to connect the remote ERT module to the register.
Appendix B Troubleshooting
Tips for troubleshooting 100W ERT module operation.
C
H A P T E R
1
Before You Begin