Installing the 100W-R and 100WP-R ERT Modules
TDC-0951-005 100W-R and 100WP-R Datalogging ERT Module Installation Guide
32
Proprietary and Confidential
5.
Place the ERT module on the register, ensuring the edge of the ERT module housing is seated properly
around the perimeter of the register as shown below.
Note
A gasket is not required.
6.
Install four Torx-head mounting screws (SCR-0010-005) as shown below and hand-tighten the screws.
Warning
User Itron mounting screws (SCR-0010-005). Using the wrong mounting screws could crack
the plastic ERT module housing.
