ItowaK
TUNNER SETS
USER MANUAL
15
9.3. CONNECTING THE RECEIVER
Attention: If the Stop manoeuvre does not require independent contacts, a jumper should be made
between terminals 23 and 25, and the manoeuvre in terminals 24 and 26 should be connected.
* This relay can be configured as N.C. through the jumper located at the back of the plate.
** Other power supplies to be consulted.
Summary of Contents for TUNNER SETS
Page 1: ...ItowaK USER MANUAL TUNNER SETS GCFI...
Page 2: ......
Page 5: ...ItowaK TUNNER SETS USER MANUAL...
Page 23: ......
