Itowa TUNNER SETS, User Manual

Page: 13 / 23

ItowaK
TUNNER SETS
USER MANUAL
7
5. INSTALLATION AND START-UP
5.1. INSTALLATION OF THE RECEIVER
The receiver should be installed in an accessible location to be able to work on it easily.
¡ATTENTION!: IT IS VERY IMPORTANT TO CLOSE THE COVER OF THE RECEIVER
PROPERLY IN ORDER TO ENSURE SEALING. THE GUARANTEE DOES NOT
COVER ANY BREAKDOWNS CAUSE BY INCORRECTLY CLOSING THE COVER.
In applications with an exterior antenna, it should be free of metal shields in order to achieve a better
radio link and avoid failures in communication.
5.1.1. FASTENING OPTIONS
Standard fixing
1
2
Optional fixing
For the magnetic fastening option, it should be placed on a metal surface with a MINIMUM
THICKNESS OF 4 MM, where the two magnets contact the flat surface.
¡ATTENTION!: ONCE INSTALLED, CHECK THAT THE SET IS FIRMLY ACNHORED AND
DOES NOT SLIDE.
Due to the magnetic force of the magnets, to dismantle the set, lever with a flat screwdriver between the
metal structure of the machine and the magnetic fastening.
VA001226
VA001383
VA001384