Itowa TUNNER SETS, User Manual

Page: 15 / 23

ItowaK
TUNNER SETS
USER MANUAL
9
4) Release the manoeuvre button and then press it again.
5) The leds and will start to flash simultaneously from one to three times, indicating the set time,
which can be:
- Mode 1
: 180 seconds (one flash).
- Mode 2: 330 seconds (two flashes).
- Mode 3: continuous transmission (three flashes).
Repeat this sequence to change from one mode to another in a cycle.
To activate the transmitter again, the battery should be removed and then inserted.
5.4.2. BATTERY STATUS
When the transmitter detects that the battery is at a certain level of discharging, the led will start to
flash and the horn will turn on intermittently (reserve). After about 10 minutes, the transmitter will switch
off and the led
will be permanently on (flat battery).
6. MAINTENANCE OF THE RADIOCONTROL SET
The equipment you have purchased is manufactured using top quality materials to ensure perfect working
order and operation of the remote control. Similarly to all machinery and equipment, the remote control
requires minimum basic maintenance tasks that should be performed. In order to increase the life span
of the apparatus and avoid unnecessary repair costs, we advise you to carefully follow these preservation
and maintenance recommendations.
- Use the fastening accessories and shoulder strap suitably and adjust them so that the set can be
used comfortably and safely.
- The pushbuttons of the set are of elastic material to give elasticity, touch and water tightness, this
means that special care should be taken not to use sharp objects which could damage the structure
of the pushbutton. Replace the pushbuttons immediately if they are worn or damaged
.
¡ATTENTION!: ORIGINAL SPARE PARTS SHOULD BE USED FOR ALL REPAIRS, SAFETY
SPECIFICATIONS OF THIS EQUIPMENT AND OF THE TRANSMITTER AND UHF
RECEIVER SHOULD NOT BE MOVED.