PM605KT/PM605KT-B Technical documentation
29
■
MDR shaft must be tightened firmly with the mounting bracket supplied as
standard accessory.
Failure in tightening MDR shaft causes rattling, resulting in cable disconnection
and malfunction.
■
Install the roller with the appropriate number of person according to the product
weight.
6. Installation
MDR installation
6-3.
MDR installation with
hexagonal shaft on free
side
MDR installation with hexagonal shaft on free side
Insert cable side shaft through the frame
shaft hole.
1
2
Press the spring loaded shaft (non
cable side) with flat head screw driver
and carefully insert it to the frame
shaft hole.
Tools required
13mm wrench (spanner)
■
Care must be paid not to
pinch the cable.
■
Do not press the shaft
beyond the thrust collar.
■
As shown in the below
figure, make sure that the
spring loaded shaft pops
out from the frame hole.
13
Flat head screw driver
6mm hex wrench
Cable
Spring-loaded
shaft
Safety precautions
Preparation Before Installation
Check product
Installation
Maintenance
Appendix
Original notice - A1.1