background image

 

Copyright

 

TSI Incorporated / 2007-2016 / All rights reserved. 

Fax No. 

(651) 490-3824 

Limitation Of Warranty And Liability

 (effective February 2015) 

 
Seller warrants the goods, excluding software, sold hereunder, under normal use and 

service as described in the operator's manual, to be free from defects in workmanship 

and material for 

24 months

, or if less, the length of time specified in the operator's 

manual, from the date of shipment to the customer. This warranty period is inclusive of 

any statutory warranty. This limited warranty is subject to the following exclusions and 

exceptions:   

a. Hot-wire  or  hot-film  sensors  used  with  research  anemometers,  and  certain  other 

components when indicated in specifications, are warranted for 90 days from the date of 

shipment;  

b. Pumps  are  warranted  for  hours  of  operation  as  set  forth  in  product  or  operator’s 

manuals; 

c. Parts repaired or replaced as a result of repair services are warranted to be free from 

defects in workmanship and material, under normal use, for 90 days from the date of 

shipment;  

d. Seller does not provide any warranty on finished goods manufactured by others or on 

any  fuses,  batteries  or  other  consumable  materials.  Only  the  original  manufacturer's 

warranty applies; 

e. This warranty does not cover calibration requirements, and seller warrants only that 

the instrument or product is properly calibrated at the time of its manufacture. 

Instruments returned for calibration are not covered by this warranty;   

f.  This warranty is 

VOID

 if the instrument is opened by anyone other than a factory 

authorized service center with the one exception where requirements set forth in the 

manual allow an operator to replace consumables or perform recommended 

cleaning;   

g. This warranty is 

VOID

 if the product has been misused, neglected, subjected to 

accidental or intentional damage, or is not properly installed, maintained, or cleaned 

according to the requirements of the manual.Unless specifically authorized in a 

separate writing by Seller, Seller makes no warranty with respect to, and shall have no 

liability in connection with, goods which are incorporated into other products or 

equipment, or which are modified by any person other than Seller.  

The foregoing is 

IN LIEU OF

 all other warranties and is subject to the 

LIMITATIONS

 

stated herein. 

NO OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR 

PARTICULAR PURPOSE OR MERCHANTABILITY IS MADE. WITH RESPECT TO 

SELLER’S BREACH OF THE IMPLIED WARRANTY AGAINST INFRINGEMENT, 

SAID WARRANTY IS LIMITED TO CLAIMS OF DIRECT INFRINGEMENT AND 

EXCLUDES CLAIMS OF CONTRIBUTORY OR INDUCED INFRINGEMENTS. 

BUYER’S EXCLUSIVE REMEDY SHALL BE THE RETURN OF THE PURCHASE 

PRICE DISCOUNTED FOR REASONABLE WEAR AND TEAR OR AT SELLER’S 

OPTION REPLACEMENT OF THE GOODS WITH NON-INFRINGING GOODS.

  

TO THE EXTENT PERMITTED BY LAW, THE EXCLUSIVE REMEDY OF THE USER 

OR BUYER, AND THE LIMIT OF SELLER'S LIABILITY FOR ANY AND ALL LOSSES, 

INJURIES, OR DAMAGES CONCERNING THE GOODS (INCLUDING CLAIMS 

BASED ON CONTRACT, NEGLIGENCE, TORT, STRICT LIABILITY OR 

OTHERWISE) SHALL BE THE RETURN OF GOODS TO SELLER AND THE REFUND 

OF THE PURCHASE PRICE, OR, AT THE OPTION OF SELLER, THE REPAIR OR 

www.

.com

[email protected]

1.800.561.8187

Summary of Contents for AIRFLOW TA440
















Reviews: