Operation
7
DATA LOGGING
Measurements
Measurements to be logged are independent of measurements
on the display, and must therefore be selected under DATA
LOGGING
Measurements.
Log Mode/Log Settings
You can set Log Mode to Manual, Auto-save, or Cont-key.
Manual mode does not automatically save data, but instead
prompts the user to save a sample.
In Auto-save mode, the user manually takes samples that are
automatically logged.
In Cont-key mode, the user starts taking readings and logging
by pressing the
key. The instrument will continue taking
measurements until the
key is pressed again.
Auto-save and Cont-Key modes have the following additional
Log Settings:
Mode
Log Settings
Auto-save
Log Interval
Cont-key
Log Interval
Pressing the
keys simultaneously will lock the keypad to
prevent unauthorized adjustments to the instruments. To
unlock the keypad, press the
keys simultaneously.
Delete Data
Use this to delete all data, delete test or delete sample.
% Memory
This option displays the memory available. Delete All, under
Delete Data, will clear memory and reset the memory available.
www.
.com
1.800.561.8187
