Quick
Reference
Copyright © ITECH Electronics Co., Ltd.
12
(10W)
Set the range of the m
Ω Meter to 10W
(List)
Generate programs in List Mode
(Info)
Check the information of the power supply
2.5 Function description of VFD status indicators
IT6100B series power supply VFD indicator lamps description as follows:
Chart
Indication
Chart Indication
OFF
Output is off currently
Rmt
Controled in remote mode
CV
Function in CV mode
Error
Error happens.
CC
Function in CC mode
Prot
OVP function is triggered.
Shift
Shift button is pressed
Lock
Front-panel is locked
Addr
Matching address when
communicate by GPIB
Srq
Power supply is in GPIB
serial polling request mode
Trig
Waiting for a trigger signal
-
-
2.6 Power-on self-test
A successful self-test indicates that the purchased power product meets delivery
standards and is available for normal usage.
Before operation, please confirm that you have fully understood the safety
instructions.
To avoid burning out, be sure to confirm that power voltage matches with
supply voltage.
Be sure to connect the main power socket to the power outlet of protective
grounding. Do not use terminal board without protective grounding. Before
operation, be sure that the power supply is well grounded.
To avoid burning out, pay attention to marks of positive and negative polarities
before wiring.
Self-test steps
Normal self-test procedures:
1. Correctly connect the power cord. Press
Power
key to start up.
2. After self-test, if the power supply is normal, then VFD will display the output
voltage and current status as below:
OFF
0.000V 0.0000A
0.0001V
