10-11
SECTION 10
PLUMBING SYSTEMS
10 - PLUMBING SYSTEMS
4. Remove and discard the water filter cartridge
•
Raise the valve handle on the filter base.
•
Twist the filter cartridge counterclock-
wise about 90° and pull it down and out
of the filter base.
•
Place a container beneath the filter base
and lower the valve handle to drain any
water remaining in the filter lines.
5. Install the antifreeze diverter plug -
•
Raise the valve handle on the filter base.
•
Hold the diverter by the support bar as
shown and guide it up into the filter base.
•
Push the diverter up into the head as far
as possible and turn it clockwise approxi-
mately 90° until it stops.
•
Lower valve handle to lock the diverter
plug in place.
NOTE: Before using again the following
spring:
•
Flush out the system with the diverter in
place.
Water Filter Assembly -
Below Galley Sink