4
you have a suitable power supply before connecting the product. If in doubt contact your dealer or check with your
local power provider.
Ensure both the product and mains power switches are in the OFF position before connecting the AC power cable.
Do not connect or disconnect the power plug with a wet hand as this may cause electric shock.
Always hold the power plug to connect/disconnect the power cable to/from the mains socket. Unplugging by pulling
on the cable can cause fraying and may lead to fire or electric shock.
This product has an earthed plug as a safety feature and will only connect to an earthed socket. Do not attempt to
defeat the earthing or there is a risk of fire or shock.
If using an extension cable or power strip ensure that the total current rating (amperes) of all connected equipment is
less than the maximum rating of the extension cable, power strip or wall outlet. If the product is already supplied with
a fitted power strip then no additional power strip or extension cable should be used to connect to the mains wall
outlet. Otherwise, fire or shock may occur.
Ensure the power cable is routed so as not to be damaged or cause a trip hazard. If the cable becomes frayed or
damaged replace it immediately to prevent any risk of shock.
Do not twist, constrict or knot the power cable as this can cause overheating which may lead to fire or electric shock.
Ensure the power socket to which the product is connected is easily accessible at all times and not obstructed.
Use only the power cable supplied. Using a power cable not intended for this product may lead to fire or electric
shock.
To avoid risk of fire and electric shock, do not use the power cable supplied with this product for any other electrical
equipment.
If you do not connect the power cord or any other cables only as directed in the User’s Guide, this may result in a
fire.
It is recommended that the machine is switched off prior to opening covers; otherwise there is a risk of electric
shock.
When the product cover is open, do not touch the fuser unit or print head as you may receive burns. Allow it to cool
before touching.
If the product casing gets extremely hot or smoke, unusual smells or abnormal noises are emitted from the product,
there is a risk of fire. Unplug the mains connector and contact your iSys.
If the product has been knocked over or damaged, there is a risk of electric shock, fire and/or injury. Unplug the
mains connector and contact iSys.
If any liquid (for example water) is allowed to enter the product, there is a risk of fire. Unplug the mains connector
and contact your iSys.
Do not place containers containing liquid on the product as electric shock, fire and/or injuries may occur.
If any foreign objects (for example clips) are allowed to enter the product, there is a risk of electric shock, fire and/or
injury. Unplug the mains connector before removing the object.
Do not introduce foreign objects into the ventilation holes or operate this product with any covers open or doors
removed as electric shock, fire and/or injuries may occur.
Do not use an extremely flammable spray near the product as the product contains high temperature parts that may
cause a fire.
Switch the product off before cleaning to prevent any risk of injury. Clean using a damp cloth. Do not use liquid or
aerosol cleaners.
Ensure loose clothing and hair is kept clear of moving parts when the product is in operation to prevent possible risk
of injury.
Do not carry out any operations on the product that are not specified in the User’s Guide. This may result in electric
shock, fire and/or injury.
Do not touch the battery if one is fitted to the product. There is a risk of explosion if the battery is replaced by an
incorrect type. The product battery should not require replacement during the life of the product.
Do not throw toner cartridges or image drum cartridges into a fire as you may receive burns from a dust explosion.
After installing additional memory, hard disk drive, or any other internally fitted option, any covers removed or doors
opened must be closed or replaced and secured to prevent risk of fire.
The acoustic noise of this product is less than 70 dB (A) as measured in accordance with EN ISO 7779.
The operating condition range for your product is: 10 to 32°C and 20 to 80% RH. Operation of the product outside
this range could result in damage to the product.
If a scanner, finisher etc. is fitted, exercise care when moving these items so as to avoid risk of entrapment or
personal injury.
If the product is installed on a cabinet or high capacity feeder, ensure wheel locks are applied once placed in final
position for use, to prevent risk of movement or injury.
