8
STEP 18
STEP 19
1. Insert the power cable.
2. Turn the printer ON.
In order to reduce electromagnetic interference—”noise”
that interferes with TVs or other appliances—you must
place the included ferrite core on the network cable.
1. Loop the cable as shown placing the core about 1 inch
from the connector on the printer end. Note: The network
cable is not provided.
2. Connect the network cable between the printer and
the Ethernet hub or router. Install the parallel cable if
used.
Note: Install the printer software BEFORE connecting the
USB cable.
Duplexer
STEP 1
STEP 2
